It's not easy!

                                                                Pica  1/5th scale P51 D Mustang Build Part  2                                                           continued from part one here   again click on pics to enlarge   some more than others as I reduced (resized kb) to speed upload   Fuel  tank cap  from  bespoke models  Adjust wing alignment before drilling for wing bolts  and tapping holes for wing bolts  Wing fairing 1/16' ply  pink foam & filler Glassing Fairing     above pre primer fairing, below the indent washers &  screws added  Result of molding fairing in situ. pa...

   Pica 1/5th near scale Mustang build  part one    Back in 2020 the start of  Covid lock down  I dug the Two 1/5th scale Pica kits I had tucked away in my garage One being the Mustang the other a Spitfire kit  bought years earlier, as I had just completed a 1/6th Mick Reeves MK16 spitfire  I choose to start the Mustang, some two years later  I  got to run up the Moki 210  Engine   in the  garden..  so here are pics taken during my build  not blow by blow,   Maybe not in the correct order, I  spent hours looking at Mustang pics & forums  and I came across  a complete  Mustang Build topic on  RCU build by Szempruw link   I found this to be of great help during my build, I know much about Spitfires, Hurricanes & Wyverns  etc,  If you read  my blog of  models I have built & they have all flown..  Very little Knowledge regards Mus...